Study of the Working Parameters of a Spading Machine = Ásógép munkaparamétereinek vizsgálata
  • Metaadatok
Tartalom: http://real.mtak.hu/141732/
Archívum: REAL
Gyűjtemény: Status = Published
Subject = T Technology / alkalmazott, műszaki tudományok: TJ Mechanical engineering and machinery / gépészmérnöki tudományok
Type = Article
Cím:
Study of the Working Parameters of a Spading Machine = Ásógép munkaparamétereinek vizsgálata
Létrehozó:
Pásztor, Judit
Tolvaly-Roșca, Ferenc
Forgó, Zoltán
Kiadó:
ST Press
Dátum:
2021-12
Téma:
TJ Mechanical engineering and machinery / gépészmérnöki tudományok
Tartalmi leírás:
Basic tillage is the deepest tillage in the tillage system. This is often done with a spading machine in greenhouses. The energy required for spading is high. Using a SimuLink simulation based on the assembly model of a spade created with real data, we investigate the effect of operating parameters on the secondary operations of spading, the loosening and shredding. The results obtained are checked by measurements. In this article the compactness of the unworked and worked soil was measured and the degree of shredding was determined at three forward speeds. Based on the obtained results, the correlation between the geometry of the excavated soil slice and the working speed can be seen from the trajectory of the spading point. This knowledge can be used in the development of cultivation technology. The information can be used in the development of cultivation technology.
Nyelv:
angol
Típus:
Article
PeerReviewed
info:eu-repo/semantics/article
Formátum:
text
Azonosító:
Pásztor, Judit and Tolvaly-Roșca, Ferenc and Forgó, Zoltán (2021) Study of the Working Parameters of a Spading Machine = Ásógép munkaparamétereinek vizsgálata. Journal of Applied Technical and Educational Sciences, 11 (4). pp. 1-13. ISSN 2560-5429
Kapcsolat:
275