Mechanical behavior of glass fiber-reinforced bosses: experiments and FE simulations
  • Metaadatok
Tartalom: https://pp.bme.hu/me/article/view/1244
Archívum: PP Mechanical Engineering
Gyűjtemény: Articles
Cím:
Mechanical behavior of glass fiber-reinforced bosses: experiments and FE simulations
Létrehozó:
Soós, Enikő
Goda, Tibor
Kiadó:
Budapest University of Technology and Economics
Dátum:
2011-01-01
Téma:
short glass fiber-reinforced polyamide; linear viscoelasticity; viscoplasticity; compression test; finite element analysis
Tartalmi leírás:
This paper, on the one, reports experimental data on injection molded polyamide 6 boss reinforced with 30 wt% of short glass fibers (PA6 GF30), on the other, presents an FE modelling technique for modeling viscoplastic material response. Before the tests all the specimens were conditioned to a moisture content of 1 wt%. The water concentration in the material was checked by weighting. All the mechanical tests have been carried out in compression mode (compression test, compression loading-unloading test, cyclic compression loading-unloading test, compression loading-relaxation-unloading-recovery test) by using a Zwick 1454 type tensile tester equipped with a temperature controlled chamber. The fiber orientation and the strain distribution in the boss was investigated by scanning electron microscopy (SEM) and optical grating technique. The modeling technique presented is based on the overlay method and the generalized Maxwell model. In order to take plastic deformations into consideration the linear viscoelast ic Maxwell-model was generalized to viscoplasticity by replacing the linear spring with an ``elastic-plastic´´ spring. The applicability of the model was proved by finite element simulation.
Nyelv:
angol
Típus:
info:eu-repo/semantics/article
Peer-reviewed Article
info:eu-repo/semantics/publishedVersion
Formátum:
application/pdf
Azonosító:
10.3311/pp.me.2011-1.01
Forrás:
Periodica Polytechnica Mechanical Engineering; Vol. 55, No. 1 (2011); 3-14
Kapcsolat:
Létrehozó:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the npaper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.